LED Tube 4FT18W UL DLC Listed

LED Tube 4FT18W UL DLC Listed

 

More details

Inquiry

Bookmark and Share

LYT84FT18

LED Tube 4FT18W UL DLC Listed,130LM/W,5 years warranty

 

Model: LYT84FT18

Length:4feet

Power:18W

Voltage:AC 100-277V

Color Temperature300:0K/3500K/4000K/4500K/5000K

LED Type / Qty:Epistar 2835/96pcs

Cover:Clear & Frosted

Lumens:2300 & 1890

Bean Angle:120°

CRI>80

Rated Life:50,000 hours

Certification:DLC, UL, cUL, CE, RoHS

Warranty:5 years

 

Features:

1. No UV or RF interference

2. Longer life than incandescent & fluorescents

3. No mercury, no ballast required, wide voltage and constant current design, solid state

4. High shock & vibration resistant

5. Mercury free, 66%+ savings in energy consumption

6. Quiet, no noise, no flickering

7. The products are in accordance with CE, UL, RoSH and FCC testing standards

8. Retro-fit kits available for direct replacement of fluorescent fixture.

 

DLC Listed LED Tube Light!  Closest color temp as traditional fluorescent. Try a few and you'll see our quality and performance!

 
Features & Benefits:
High Brightness
Our DLC LED T10 Tube Light consists of high quality SMD LEDs and can emit a higher brightness at much lower cost.  Surface mount LEDs transfer heat better and are a better solution for longevity, low power consumption and minimal heat.

Easy Installation
Our DLC LED T10 tube Light can be easily installed like a conventional fluorescent light into the existing sockets.  Ballast is removed/bypassed one time and you enjoy more energy savings. DLC requires 3 Lamps (Sold Individually) "kit" to be DLC approved.

Extended Life
With very little heat output, proper drive characteristics and high quality LEDs, our DLC LED T10 Fluorescent Light Tube has a lifetime of up to 50,000 hours.  These are the highest quality tube lights available on the market today - You get what you pay for.

Pin Configurations
Our DLC SMD LED Fluorescent Tube Light Retrofit allows for the standard "Medium Bi-Pin" (G13). Fixed Bi-Pin End caps Only.

Multiple Lens Options!
We offer a Full Frosted (similar diffusion to a traditional fluorescent tube light) poly-crbonate lens, a semi-frosted lens (Light Emitting Diodes are still visible), or a completely Clear lens! 

The  DLC LED T10 Tube is manufactured under Strict DLC Specifications, contains no MERCURY, Emits Less than 15% RF interference and is UL Approved!!

Humidity/Moisture Resistant
With IP50 degree protection, our DLC LED T10 Tube Light can operate normally even in a indoor environment.  Can operate in moist environments in 'seal-tight' fixtures.

Energy Saving!
Our DLC LED T10 Tube Lights consume power from 8W to 18W. This saves much more energy than conventional fluorescent T8/T12 light tubes. 

By just retrofitting your existing fixtures, you'll enjoy a 55%+ electrical savings!
 
The DLC LED T10 Tube Fluorescent Light is completely enclosed. The LEDs are surrounded by a Clear or Frosted acrylic lens and emit light like a conventional T-series fluorescent light. Our DLC LED T10 Tube is typically used for lighting in Retail, Warehouses, Garages,

Basements, Task Lighting, Store Displays, General Lighting, RVs,Buses, Under Cabinets, Storage Facilities, Generator Powered Remote Sites, Cold Storage, Solar Installations and more. It can be used anywhere you have a T8/T12 series fixture! Yes, we offer DC voltage

tube lights for your Solar or Mobile applications!

Available in four different color corrected temperature renderings:

    Warm White:      3000 Kelvin*; ~ 2021 lumens  - Warm 'Incandescent' Light
    Natural White:    4000 Kelvin*; ~ 2100 lumens  - Yellowish White Light
    Daylight White:   5000 Kelvin*; ~ 2150 lumens  - Pure White
   
No Hum or Buzz
Instant Start; No Flickering
ROI - 18 to 24 months (even quicker with increasing electric rates!)
Patented Power Rectifier - Will not inject RF interference onto the power line.  Excellent for X-10 or other power line Home Automation

installations!
Patented Aluminum extruded backing heat sink in aluminum
Full Frosted Lens
DLC/UL/CE APPROVED
ROHS Compliant
Limited Manufacturer 5 year Warranty
Aluminum heat sink, 110 High Brightness LED's, available in Warm White (30x), Natural White(40x) or Day White(50x), No UV or RF interference, Patented heat sink and optical diffuser, longer life than incandescent & fluorescent . No mercury, no ballast required,wide voltage and constant current design, solid state, high shock &vibration resistant, Mercury free, 50%+ savings in energy consumption, quite, no noise, no flickering, This product is cULus/cETLus Approved.  The products are also in accordance with UL,CE and FCC testing standards.

 

 

30 other products in the same category: